The Davis block-type boring tool system can deliver up to 50% savings on your initial cost. And your investment in tooling is less because just five standard Davis bars handle all boring jobs from 1” through 12.5” diameter. That’s less than half the number of conventional boring bars normally required.
With a Davis block-type boring tool system you can cut up to three times faster.
Two cutters cut faster than one, and feeds with two cutter blocks are up to three times faster than those with single point tools.
There is also a greater range of operations per bar. With seven interchangeable cutter blocks, one Davis bar can handle multiple machining operations including boring, counterboring, facing, chamfering and combinations of these operations.
Accuracy is improved with balanced chip load. The Davis system gives accurate, round taper free bores every time. The chip load is balanced between the two cutters, and the opposed cutting action minimizes the effect of tool wear and bar deflection.
Davis adjustable tooling provides full presetting of both radial and axial accuracies, with tolerances of +.0005” on diameters easily held with normal care.
And, with a Davis block-type boring tool system, tool changeover is fast – leading to improved productivity. With our system, it only takes 20 seconds to change tools. There are no parts to assemble, no alignment checks to make. With the Davis block-type cutters system, production does not stop!
